How much does Viking repair cost in Fort Worth?

Repair cost depends on the appliance and the part that failed. Our $69 diagnostic fee is always included in the final repair price, and we quote you the exact cost before any work begins.

Do you diagnose Viking error codes?

Yes — we read and diagnose Viking fault codes and fix the underlying problem rather than just clearing the code.

Is a Viking range worth repairing?

Almost always. A Viking range costs $5,000–$15,000 to replace and is built with commercial-grade components designed for decades of use. Burners, igniters, elements and control boards are all serviceable parts. We diagnose the exact fault and give you the honest cost before any work.

Do you offer same-day Viking repair in Fort Worth?

In most cases yes for common faults. For premium and imported brands some parts are ordered — we tell you the realistic timeline up front.

🔥 Viking Appliance Repair — Fort Worth, TX

Viking Appliance Repair in Fort Worth, TX

Viking built its name on commercial-grade kitchen equipment for the home — ranges, built-in refrigerators, wine coolers and hoods. These are appliances worth repairing, not replacing: a Viking range is a serious investment engineered to last decades. We service Viking across Fort Worth, Southlake, Westlake and Colleyville. $69 diagnostic always included in the repair price.

📞 Call (682) 304-9704 Book Online →

✅ $69 Diagnostic Included

⚡ Same-Day Available

🔥 Viking Serviced

⭐ 5.0★ / 77 Reviews

Viking Professional built-in refrigerator serviced in Fort Worth, TX - Done Right Appliance Repair

Common Viking Problems

Viking Problems We Fix in Fort Worth

These are the Viking repairs we handle most often across the Fort Worth area. We quote the exact cost before any work begins — the $69 diagnostic is always included in the repair.

Range Burner Won't Light

Failed spark module, clogged burner ports, or a worn igniter. Viking's open burners are rebuildable — we restore proper flame rather than replacing the range.

Oven Not Heating Evenly

Bake or broil element failure, convection fan issues, or a drifting oven sensor. Viking ovens hold calibration well once the actual fault is corrected.

Built-In Refrigerator Not Cooling

Condenser cleaning, evaporator fans, defrost failures and control faults. Viking built-ins are engineered for 20+ years, so these repairs pay for themselves many times over.

Ice Maker Failure

Viking ice maker modules, water valves and fill-tube freezing. Repairable, not disposable.

Wine Cooler Temperature Issues

Dual-zone control faults, fan failures and door seal problems on Viking wine storage units.

Dishwasher Not Cleaning or Draining

Viking dishwasher wash pumps, drain pumps and spray arm assemblies — serviced with proper parts.

Range Hood / Ventilation

Blower motor, control switch and lighting faults on Viking professional hoods.

Control Panel & Display Faults

Control boards on Viking ranges and refrigerators — diagnosed precisely so you don't pay for the wrong board.

Fault Codes

Viking Fault Codes We Diagnose

We diagnose the underlying fault behind the code — not just clear it and hope.

Flashing Display

Control or sensor fault — needs diagnosis

Oven won't reach temp

Element, sensor or relay

Fridge alarm

Door, temp or defrost fault

Ignition clicking

Spark module or burner port issue

Real Work — Real Photos

Inside a Viking We Serviced

Photos from an actual Viking Professional built-in service call in the DFW area — not stock images.

Viking Professional built-in refrigerator badge, Fort Worth TX service call — Viking Professional built-in. These units are engineered for 20+ years, which is why a fault is worth diagnosing properly rather than writing the unit off.

Ice buildup on Viking freezer floor from a blocked defrost drain — Ice sheeting across the freezer floor — the defrost drain had backed up, so meltwater refroze instead of draining away.

Viking evaporator coil iced over from defrost system failure — Behind the panel: the evaporator coil iced at the base with the defrost heater exposed. Airflow stops here, and the compartment stops holding temperature.

5.077 reviewsSee all on Google →

Maya Alex

1 review

a month ago

Great value · $200–250

Our GE dryer suddenly stopped drying clothes, so we called Done Right Appliance Repair here in Keller. Andrew was able to come out the same day and fixed it in just one visit. Everything was quick and professional, and the dryer has been working great so far. Very happy with the service and would definitely recommend them!

Dushyant Bhavsar

Local Guide · 32 reviews · 107 photos

2 months ago

Affordable · $250–300

My Samsung top-load washer had been having a frustrating issue where it would randomly stop in the middle of different wash cycles. When this happened, all the selected option lights and the remaining time display would start flashing, and the washer would not continue the cycle. Andrew did a great job diagnosing the problem and explaining what needed to be repaired. He ordered the required parts and, as soon as the parts arrived, he came back and replaced them the same day. He gave enough time to fix the problem correctly instead of doing some reset on the machine and just finding some temporary fix for the problem. I am extremely satisfied with the services that I received. I would strongly recommend Andrew and Done Right Appliance Repair to everyone in need of having their washing machine or any appliance fixed.

Dave

Local Guide · 32 reviews · 19 photos

3 months ago

Great value · $300–350

Andrew was amazing---yes, simply amazing. We have a GE Double Oven that showed a F35 Code. I went online, saw how to fix it, got the control board, replaced it… and the same code!! I gave up and called him by his google reviews (all 5 star). He came, diagnosed and put a new board in the oven… and we got the same F35 Code. I resigned that the oven was now scrap. He went home and studied the manual, yes actually study the manual. He figured out that the oven had the control boards switched because a place with a capacitor that was suppose to have 6 pins had 7. He investigated this detail, got the other board, came back and replace the actual defective board. IT is FIXED and not on the way to the dump. I have never had person due that much work to solve the problem. He added nothing to the overall cost and was happy he was able to fix it.