How much does GE appliance repair cost in Fort Worth?

Repair cost depends on the appliance and the part that failed. Our $69 diagnostic fee is always included in the final repair price, and we quote you the exact cost before any work begins — no surprises.

Do you diagnose GE error codes?

Yes — we read and diagnose GE error codes on washers, dryers, refrigerators and dishwashers, and fix the underlying fault rather than just resetting the code.

Do you service GE Profile and Café?

Yes — Profile and Café are GE's premium lines and use much of the same platform. We service both, including built-in refrigerators and slide-in ranges.

Do you offer same-day GE repair in Fort Worth?

In most cases yes — we stock common GE parts on the truck. Call before noon for best same-day availability.

GE Appliance Repair Fort Worth, TX

Common GE Problems

GE Problems We Fix in Fort Worth

These are the GE repairs we see most often in the Fort Worth area. Price quoted before any work begins — the $69 diagnostic is always included in the repair.

Washer Not Spinning or Agitating

Failed drive belt, transmission mode shifter, or lid lock. GE top-loaders have known shifter issues we fix routinely.

Fridge Not Cooling

GE refrigerators commonly fail at the evaporator fan, main control board, or inverter compressor start-up. Precise diagnosis matters here.

Dryer No Heat

Heating element, safety thermostat, or timer fault. Same-day in most cases.

Dishwasher Won't Start

Door latch, control board, or thermal fuse. We test rather than guess.

Ice Maker Problems

GE ice makers fail at the motor module or water valve. Repair or full replacement — we quote both.

Oven / Range Issues

Bake element, igniter, infinite switch, or control board on GE ranges — gas and electric.

Microwave Problems

GE over-the-range microwaves — magnetron, door switches, control panel. Common and repairable.

Freezer Not Freezing

Defrost system, evaporator fan, or thermostat on GE freezers and refrigerator freezer compartments.

Error Codes

GE Error Codes We Diagnose

Seeing one of these on your GE display? We diagnose the underlying fault and fix it — not just reset the code.

H2O

Water supply issue

E1–E8 (dishwasher)

Sensor / leak faults

F2 / F3 (oven)

Over-temp or sensor fault

FF (fridge)

Freezer temp warning

Real Work — Real Photos

GE Repairs We've Done

Actual GE service calls from Fort Worth, Keller and across DFW — not stock images. We add new photos from recent jobs regularly.

Genuine GE Appliances replacement oven igniter - Fort Worth TX — A genuine GE replacement igniter, straight from the GE Appliances box. On a gas oven the igniter is what opens the safety valve, so an off-spec aftermarket part fails again within months.

GE gas oven floor panel removed for igniter replacement - Fort Worth TX — Gas oven with the floor panel out and the burner tube exposed — the old igniter glowed but never pulled enough current to open the valve.

GE Monogram appliance serviced in Fort Worth, TX — GE Monogram — GE’s premium built-in line. Same engineering family as standard GE, so parts and diagnostics carry straight over.

GE appliance smart connectivity module used during diagnostics - Fort Worth TX — GE’s connectivity module hooked up during service — on newer GE units it reads fault history the front display never shows.

GE refrigerator main control board diagnostics - Fort Worth TX — GE refrigerator main control board. We check every connector and circuit before deciding a board really needs replacing.

GE Profile built-in wall microwave pulled out of the cabinet for bench diagnostics.

Hotpoint dryer repair - Fort Worth TX — Hotpoint is made by GE — same parts, same repairs. Simple, durable dryers that are almost always worth fixing.

5.077 reviewsSee all on Google →

Maya Alex

1 review

a month ago

Great value · $200–250

Our GE dryer suddenly stopped drying clothes, so we called Done Right Appliance Repair here in Keller. Andrew was able to come out the same day and fixed it in just one visit. Everything was quick and professional, and the dryer has been working great so far. Very happy with the service and would definitely recommend them!

Dushyant Bhavsar

Local Guide · 32 reviews · 107 photos

2 months ago

Affordable · $250–300

My Samsung top-load washer had been having a frustrating issue where it would randomly stop in the middle of different wash cycles. When this happened, all the selected option lights and the remaining time display would start flashing, and the washer would not continue the cycle. Andrew did a great job diagnosing the problem and explaining what needed to be repaired. He ordered the required parts and, as soon as the parts arrived, he came back and replaced them the same day. He gave enough time to fix the problem correctly instead of doing some reset on the machine and just finding some temporary fix for the problem. I am extremely satisfied with the services that I received. I would strongly recommend Andrew and Done Right Appliance Repair to everyone in need of having their washing machine or any appliance fixed.

Dave

Local Guide · 32 reviews · 19 photos

3 months ago

Great value · $300–350

Andrew was amazing---yes, simply amazing. We have a GE Double Oven that showed a F35 Code. I went online, saw how to fix it, got the control board, replaced it… and the same code!! I gave up and called him by his google reviews (all 5 star). He came, diagnosed and put a new board in the oven… and we got the same F35 Code. I resigned that the oven was now scrap. He went home and studied the manual, yes actually study the manual. He figured out that the oven had the control boards switched because a place with a capacitor that was suppose to have 6 pins had 7. He investigated this detail, got the other board, came back and replace the actual defective board. IT is FIXED and not on the way to the dump. I have never had person due that much work to solve the problem. He added nothing to the overall cost and was happy he was able to fix it.

GE Appliance Repair in Fort Worth, TX