How much does LG appliance repair cost in Fort Worth?

Repair cost depends on the appliance and the part that failed. Our $69 diagnostic fee is always included in the final repair price, and we quote you the exact cost before any work begins — no surprises.

Do you diagnose LG error codes?

Yes — we read and diagnose LG error codes on washers, dryers, refrigerators and dishwashers, and fix the underlying fault rather than just resetting the code.

My LG fridge compressor failed — is it covered?

LG linear compressors carry a 10-year parts warranty from the manufacture date. First we confirm the compressor is actually the failed part — often it isn't. Bring us your model and serial number and we'll tell you exactly where you stand, including how to use that warranty if it applies.

Do you offer same-day LG repair in Fort Worth?

In most cases yes — we stock common LG parts on the truck. Call before noon for best same-day availability.

📟 LG Appliance Repair — Fort Worth, TX

LG Appliance Repair in Fort Worth, TX

LG makes excellent appliances with a few well-known weak spots — and we know them all. Linear compressor refrigerators, direct-drive washers, and dryers with clogged-duct sensors are daily work for us in Fort Worth.

📞 Call (682) 304-9704 Book Online →

✅ $69 Diagnostic Included

⚡ Same-Day Available

📟 LG Specialists

⭐ 5.0★ / 77 Reviews

LG appliance repair technician in Fort Worth TX - Done Right Appliance Repair

Common LG Problems

LG Problems We Fix in Fort Worth

These are the LG repairs we see most often in the Fort Worth area. Price quoted before any work begins — the $69 diagnostic is always included in the repair.

Fridge Not Cooling

LG's linear compressor carries a 10-year manufacturer warranty. We diagnose whether the fault is actually the compressor or something far cheaper — fans, relays, control board — so you know exactly where you stand and can use that warranty if it applies.

Washer OE Error (Not Draining)

Clogged drain pump filter or failed pump. One of our most common LG calls — usually fixed same-day.

Washer UE Error (Unbalanced)

Worn suspension or a load-sensing fault. We diagnose which and fix the cause.

Dryer d80 / d90 / d95 Codes

These mean your exhaust duct is 80–95% blocked — a fire risk, not just an error. We clear the blockage and verify airflow.

Fridge Er FF / Er IF Errors

Evaporator or ice-room fan failure, often from icing. We replace the fan and correct the defrost issue behind it.

Washer LE Error (Motor)

Rotor position sensor or hall sensor fault on direct-drive motors. A precise diagnosis avoids replacing the wrong part.

Dishwasher Not Draining (OE code)

Same OE logic as LG washers — clogged filter, drain hose, or failed pump. Cleared and tested in one visit.

Oven / Range Faults (F codes)

LG ranges throw F-codes for sensor and control faults. We read the code, test the circuit, and replace only what actually failed.

Error Codes

LG Error Codes We Diagnose

Seeing one of these on your LG display? We diagnose the underlying fault and fix it — not just reset the code.

OE

Drain fault — pump or filter

IE

Water inlet problem

UE

Unbalanced load

LE

Motor / rotor sensor fault

dE

Door switch fault

d80/d90/d95

Dryer duct blocked — fire risk

Er FF

Freezer fan error

Er IF

Ice fan error

Real Work — Real Photos

LG Repairs We've Done

Actual LG service calls from Fort Worth, Keller and across DFW — not stock images. We add new photos from recent jobs regularly.

LG front-load washer repair - Fort Worth TX — LG direct-drive front-load washer on a service call in Fort Worth. Door, drain and spin problems are our most common LG washer calls.

LG front-load washer door lock replacement - Fort Worth TX — LG front-load door lock replaced. A failed lock stops the washer from starting or spinning — a common LG repair.

LG washer control panel during diagnostics - Fort Worth TX — LG washer control panel during diagnostics — we read the code, then test the part behind it instead of guessing.

LG refrigerator dispenser control board repair - Fort Worth TX — LG refrigerator door dispenser opened up — control board and ice chute door tested on a dispenser that stopped working.

5.077 reviewsSee all on Google →

Maya Alex

1 review

a month ago

Great value · $200–250

Our GE dryer suddenly stopped drying clothes, so we called Done Right Appliance Repair here in Keller. Andrew was able to come out the same day and fixed it in just one visit. Everything was quick and professional, and the dryer has been working great so far. Very happy with the service and would definitely recommend them!

Dushyant Bhavsar

Local Guide · 32 reviews · 107 photos

2 months ago

Affordable · $250–300

My Samsung top-load washer had been having a frustrating issue where it would randomly stop in the middle of different wash cycles. When this happened, all the selected option lights and the remaining time display would start flashing, and the washer would not continue the cycle. Andrew did a great job diagnosing the problem and explaining what needed to be repaired. He ordered the required parts and, as soon as the parts arrived, he came back and replaced them the same day. He gave enough time to fix the problem correctly instead of doing some reset on the machine and just finding some temporary fix for the problem. I am extremely satisfied with the services that I received. I would strongly recommend Andrew and Done Right Appliance Repair to everyone in need of having their washing machine or any appliance fixed.

Dave

Local Guide · 32 reviews · 19 photos

3 months ago

Great value · $300–350

Andrew was amazing---yes, simply amazing. We have a GE Double Oven that showed a F35 Code. I went online, saw how to fix it, got the control board, replaced it… and the same code!! I gave up and called him by his google reviews (all 5 star). He came, diagnosed and put a new board in the oven… and we got the same F35 Code. I resigned that the oven was now scrap. He went home and studied the manual, yes actually study the manual. He figured out that the oven had the control boards switched because a place with a capacitor that was suppose to have 6 pins had 7. He investigated this detail, got the other board, came back and replace the actual defective board. IT is FIXED and not on the way to the dump. I have never had person due that much work to solve the problem. He added nothing to the overall cost and was happy he was able to fix it.